FAQsValidationsFrequently Asked Questions (Validations)Select a question...▾How can I resolve the 'All polylines in a specific layer are far from origin. Please move them closer to origin' validation error?▾How can I resolve the 'The polyline in layer _BN_IndivSubPlot must have either an Internal Road, Main Road, or Pathway as the access road in the front margin?▾How can I resolve the 'All polylines in Room layer should not intersect with polyline in UnitBUA layer, intersections found.' validation error?▾How can I resolve the 'Ramp Entrance Slab Cut polyline for the Ramp is not exactly on top of the Ramp'?▾How can I resolve the 'The Ramp Entrance Slab Cut polyline must coincide with the entrance segment of the ramp polyline' validation error?▾How can I resolve the 'The Width of the Ramp Entrance Slab Cut polyline must be the same as the width of the Ramp Polyline' validation error?▾How can I resolve the 'Ramp does not have sufficient clearance from the ceiling for vehilces to pass. The current length of the Ramp Entrance Slab Cut polyline is 5.6, but it must be atleast 16.7039 to ensure adequate clearance' validation error?▾How can I resolve the 'Built Up Area Outline of all Floor Plans in the Building Plan must be inside corresponding Proposed Work. But found Floor Plan having some part of Built Up Area outline falling outside of Proposed Work' validation error?▾How can I resolve the 'Empty space is not allowed inside the Net Plot polyline' validation error?▾On this page
